Product Introduction:
T1033 aluminium alloy cutting fluid is a kind of biological stable Semi Synthetic Cutting Fluid particularly prepared for aluminium processing. It does not contain chlorine, phenols and nitrates., it is a formula contains low oil, will have good processing performance in hard water and soft water.
Metal Working Fluid can be classified as four types: Oil Soluble Metal Working Fluid, Water Soluble Semi Synthetic Cutting Fluid, Water Soluble Fully Synthetic Cutting Fluid and Emulsion Metal Working Fluid by different application. T1033 is one type of Water Soluble Semi Synthetic Cutting Fluid.
Application:
Suitable material: Suitable for carbon steel, copper, aluminium and plastic processing, not recommended to process aluminium alloy of silicon content more than 26%.
Processing method : Suitable for various processing methods, such as turning, milling, drilling, surface grinding, ect. This product can be widely used for sole machine and central cooling system.
Features:
★ Biological stable formula, long life.
★ Low foam, good compatibility with hard water.
★ Excellent corrosion inhibit performance, it contains special additive, to protect copper not change color.
★ Good lubricity performance, can reduce coolant spring out amount, meanwhile keep tools and parts clean.
★ Excellent washing and cooling performance.
★ Good rate of performance/cost.
★ Friendly to operator and environment, low odor.
★ Not destroy paint and is compatible with machine tool seals that are commonly used.
Recommended used concentration:
| Process Material Process Method | Low carbon steel | High carbon steel | Aluminium Alloy | Copper Alloy |
| Turning | 5% | 5% | 5% | 5% |
| Milling | 5% | 5% | 5% | 5% |
| Drilling | 5% | 5.5% | 8% | 5% |
| Tapping | 5% | 5.5% | 10% | 5% |
| Grinding | 4% | 5% | 5% | 4% |
| Sawing | 5% | 5.5% | 5.5% | 5% |
Note: For excellent antibacterial ability, the recommended used concentration is not less than 4%;
Typical Data:
| Item | Test Method | Unit | Typical Data |
| Concentration Fluid |
| Appearance | BAM 300 | - | Transparent light yellow liquid |
| Density(20°C) | IP365 | g/ml | 1.0 |
| 5% Dilution Solution |
| Appearance | BAM 189 | - | Translucent milk white |
| PH value | BS1647 | - | 7.8 |
| Antirust:
Steel
Aluminium |
IP287
- |
-
- |
0%
No rust spot |
| Foam Performance | IP312 | s | 15 |
| Refractive meter reading | - | - | 3.6 |
Note: Above are typical data, not represent specifications. If in need, MSDS is available, you can obtain information about storage, safety operation and handling. The data above is as accurate as possible, but may change based on future formula change.
Contact Now
