Can high temperature chain oil carbon deposit be solved by replacing oil suppliers?
November 04, 2023
Can high temperature chain oil carbon deposit be solved by replacing oil suppliers?
Can the high temperature chain oil carbon deposit be solved by replacing the oil supplier? This should be a question that every customer thinks about! So when the high temperature chain oil carbon, exactly what to do?
When carbon deposits are produced, this should be done: 1. Replace high temperature chain oil with good quality. If the chain is no longer able to walk, pull it out to clean and remove the residue in the conveyor line, check whether the chain is seriously worn and can continue to be used. Depends on whether to replace the chain. 2. Appropriate lubrication and regular cleaning. When the chain has coking and carbon accumulation hinders the operation of the chain, clean it with solvent oil or soak it in chemical agents. The amount of work is relatively large. How to reduce carbon deposition, it is necessary to know the coking cycle of various high temperature chain oils The use temperature of mineral type high temperature chain oil is below 150 degrees, and the coking cycle is about 1 month; polyether type high temperature chain oil use temperature between 150-220 degrees, about half a year coke; The use temperature of synthetic ester high temperature chain oil is 220-260 degrees, and the chain coking cycle is extended for more than 1 year. Therefore, when the high temperature chain oil produces carbon deposit, first find the reason, whether it is regularly cleaned, it is recommended to replace the high temperature chain oil of good synthetic fat, so that the carbon deposit problem and the black problem are solved, and the cost performance is also good!
