Can the decelerator lubricate oil be used with bubble and getting white?
June 28, 2022
Lubricating oil occurs in white phenomenon during the operation of the reducer. This phenomenon is discovered from time to time in other devices. The reason for the bubbles is now summarized as follows: 1. In the splash or oil bath method of the reducer, due to the high oil level or the viscosity of the lubricant is too large, the reducer is high in the lubricating oil, which makes the lubricant stirred severely and bubbles. 2. The shell tube cooler leaked, and the cooling water was leaked in lubricating oil, causing the deterioration of the oil to produce whitening. 3. Due to the improper installation position of the oil return pipe, the oil return position is too high, the oil return pressure is high, and the oil return to the oil surface will generate white hair. 4. When the mechanical impurities, moisture, and antioxidant are significantly lower than the specified values in lubricating oil, resulting in the deterioration of lubricating oil, and the phenomenon of bubble is generated.
The results of the phenomenon of lubrication oil and whitening phenomenon: Although lubricating oil is white, the oil is normal, and it can be treated by changing the lubricating oil viscosity label and changing the oil return position pipeline. Lubricating oil is white and white, and the oil is abnormally deteriorated. It can check the shell cooler, eliminate the leakage point, and replace the lubricant.
