Zhengzhou Chorus Lubricant Additive Co.,Ltd.

Home> Blog> Crane hydraulic oil low oil level is harmful, we must know early prevention!

Crane hydraulic oil low oil level is harmful, we must know early prevention!

April 30, 2024
Crane hydraulic oil low oil level is harmful, we must know early prevention!

In the daily work of the crane, the explosion of hydraulic tubing, the damage of the tubing head, and the aging of the oil seal will cause the loss of hydraulic oil. Therefore, the check of the hydraulic oil level in the hydraulic tank is an essential part.

lubricant additive

Some drivers do not think so, and the hydraulic oil will not be made up in time. He thought, "Anyway, the working system can still work normally, let's talk about it later!"

They did not take into account that the working environment of the crane is complex and changeable, and the horizontal position of the hydraulic oil in the tank is also changing at any time. If the hydraulic oil is not enough, it is easy to make the hydraulic system does not absorb the hydraulic oil in time, so the damage to the hydraulic system is great.

lubricant additive

What are the hazards of low hydraulic oil level to the crane?

It is mainly manifested in the following points:

1. Without inhaling hydraulic oil, it sucks in air, and the mixture of air reduces the work efficiency and slows down the operation of the crane.

2, easy to cause the hydraulic oil temperature becomes high.

3. Damage the main pump.

4. After the air enters the hydraulic system, the air can not be discharged in time, resulting in poor circulation.

5, damage to the oil circuit seals, resulting in oil leakage.

6. The pressure of hydraulic oil is weakened.

At this time do not hesitate to fill the oil, how much to fill.

Highlight! Correct steps to replace hydraulic oil

1, first release the hydraulic oil in the hydraulic tank, clean the oil tank and add new hydraulic oil

2. Remove the loop header, start the engine and idle to make the oil pump work

3. Each mechanism is operated separately, and the old oil in the circuit is discharged one by one by hydraulic oil until the new oil flows out of the return oil main pipe

4. Finally, connect the return oil main pipe with the oil tank, and add new hydraulic oil to the oil tank to the specified position.
Contact Us

Author:

Mr. James

Phone/WhatsApp:

8613783582233

Popular Products
You may also like
Related Information
Is the higher the drop point of the grease, the better? How to identify the temperature resistance of grease?

Is the higher the drop point of the grease, the better? How to identify the temperature resistance of grease? When discussing the performance of grease, the drop point, as an important physical...

How much gas is the best time to fill up your car?

How much gas is the best time to fill up your car? In daily driving, mastering when to refuel the car is an important skill that affects both driving safety and vehicle maintenance. Many drivers may...

Source analysis and detection method of bearing grease pollution

Source analysis and detection method of bearing grease pollution The pollution of bearing grease is one of the key factors affecting bearing performance and service life, and its pollution sources...

Can the Fed's emergency rate cut stimulate the weak lubricants market?

Can the Fed's emergency rate cut stimulate the weak lubricants market? In September 2024, the Federal Reserve announced a policy change that caught the attention of the market - the target range of...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Send Inquiry

Tel:0086-371-58651986

Fax:

Mobile Phone:8613783582233Contact me with Whatsapp

Email:sales@cn-lubricantadditive.com

Address:No.11 Changchun Road, High-Tech Zone, Zhengzhou, Henan

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send