How to reduce expensive chain maintenance costs and stop using the wrong chain oil!
July 04, 2022
All chains, especially roller, have special lubricants and applicable problems. Many problems occurred during the use of chains, such as: stuck, loss, cleaning, and chain. When you use an inappropriate lubricant on the chain, its lubricating oil cannot be evenly distributed in the bearing between metals and metals, so it loses lubrication effect and even affects normal operation functions. In order to avoid these shortcomings, chain oil must be specially prepared for special specials The additives are highly sticking to the metal surface. When it has a strong friction tendency and swing vibration, its oil membrane is not excluded due to heavy load when absorbing lubricating oil, and can be strongly attached to the chain.
When the chain operates at high temperature, it is often derived from the occurrence of chain stuck problems, because the air contains dust, oil is burned or oxidized, causing the roller and bearing of the chain to squeeze. When the chain operates at high temperature, the viscosity of lubricating oil will be reduced, and the chain is strongly caused by the centrifugal effect, which can easily lead to a tendency to lubricate oil.
The following problems are prone to use high temperature chain oil: 1. Cocoons and carbon accumulation are serious. 2. Dry and curing at high temperature at high temperature. 3. Corrosion on the chain. 4. Insufficient lubrication, short life of the chain. 5. Fast evaporation and smoke. Pay attention to the following matters to choose oil products: 1. Temperature viscosity: Whether the temperature and rust -proof lubrication are two basic needs, whether the viscosity is suitable; 2. Price: Choose high -cost products, quality, price, price must be compared with three; 3. Environmental protection: no smoke and no odor; 4. What is the energy consumption: whether the service life is long, whether the maintenance cost is reasonable; 5. How to clean the chain for a long time. Whether the chain is often washed. Solution: 1. Immediately stop using the error oil, regularly clean and maintain the chain, remove the accumulation of carbon on the chain, check the chain surface and the internal bearing of the guide wheel bearing, and the guide wheels rotate flexibly. 2. Replace the appropriate oil, add regular injection, and lubricate appropriately.
