Precautions for the use of metal water soluble cleaning agents!
June 05, 2022
What are the precautions for the use of metal water -soluble cleaning agents? At present, in industrial production, whether it is the processing assembly of mechanical parts, or heat treatment, electroplating, and product sealing packaging, the metal surface must be cleaned; large -scale machinery such as vehicles and ships is easy to stick oil and dust, which requires high -quality metal cleaning. Preparation, then I will explain the precautions of the use of metal cleaning agents in detail today:
1. Pay attention to the dilution concentration of the cleaning agent. The diluted concentration of the cleaning agent has a lot to do with the cleaning effect. Sometimes it is twice more diluted, which will cause a huge difference in the effect. Generally speaking, as the dilution concentration increases, the pollution ability will also be enhanced, but after reaching a certain dilution concentration, the pollution ability will no longer be significantly improved. The dilution concentration should be controlled at 1: 5-1: 10. 2. Master the temperature of the cleaning agent. Generally speaking, due to the higher the temperature of the molecular exercise, the higher the temperature of the cleaning agent, the stronger the cleaning effect. But each cleaning agent has its own best cleaning temperature, so the higher the higher the better. Especially for non -ionic cleaning agents, if the heating agent is too high, the cleaning agent will occur. The solubility of the cleaning agent in the water decreases. Some components lose their effects due to the decomposition of heating, and the decontamination capacity will be reduced. Therefore, the temperature of non -ionic cleaning agents should be controlled below the turbid point. 3. Control the time and amount of use of the cleaning agent. The diluted cleaning agent can be used multiple times. The cleaning time mainly depends on the amount, material and oil severity of the cleaning object. Under normal circumstances, one to two weeks can be used for one to two weeks. 4. Make correct cleaning according to the different types of cleaning objects. The dirt on the mechanical and equipment parts is very different, including oil, cement, carbon deposits, rust spots, and so on.
