Technical introduction of dehydrated anti-rust oil formula
** Product Overview **
Dehydrated anti-rust oil, based on its highly refined light mineral oil, cleverly integrates a series of composite additives such as anti-rust agent and film forming agent to form an efficient and multi-functional anti-rust product. It is specially designed for ferrous metal products and vehicle parts after processing, cleaning or drying with water agent, aiming to achieve a double effect - rapid replacement of trace residual moisture or moisture on the surface of the workpiece, while providing integrated dehydration treatment and medium - and long-term rust protection for wet parts.
** Safety and environmental protection features **
This product does not contain nitrite ion, hexavalent chromium ion, to ensure the use of safe and harmless process, in line with the EU RoHS requirements. Its mild formula is non-irritating to the skin and meets the dual needs of modern industry for environmental protection and safety.
** Performance advantage **
1. Excellent dehydration performance ** : With excellent water film displacement ability and low emulsification, it can quickly eliminate the trace water remaining on the metal surface, and make the separated water quickly settle at the bottom to achieve rapid separation of oil and water.
2. Excellent anti-rust properties ** : thin and uniform oil film coating, complete adsorption, small amount but strong permeability, with excellent resistance to moisture and heat, salt spray resistance, providing long-term and stable anti-rust protection for metal products.
3. ** Wide applicability ** : suitable for a variety of metal materials, including cast iron, stainless steel, iron and zinc, especially suitable for steel after room temperature or high temperature black dehydration rust treatment.
4. ** Convenient operation ** : easy to use, low cost, can be widely used in indoor storage or shipping environment of metal products rust treatment.
** Application Scenario **
In the manufacturing process of metal products, water-based cutting fluids and cleaning agents are often used, and these media will form a water film on the surface of the metal. The dehydrated anti-rust oil can quickly remove these water films and form a protective film on the metal surface, reducing the cleaning and drying process of metal products and improving production efficiency.
In addition, the dehydration anti-rust oil also has an efficient dehydration capacity, which can achieve a dehydration rate of up to 100% in a short time (such as 10 seconds), while effectively delaying the degradation of dehydration performance due to a large amount of water mixing. Therefore, it is very suitable for steel pipe manufacturing, auto parts manufacturing and other processes that need dehydration treatment.
** Formula Ingredients **
The main components of dehydrated anti-rust oil include anti-rust agent, Base Oil, film forming agent and auxiliary additives, etc. Each component is carefully selected and proportioned to ensure the performance and stability of the product.
1. Formula ratio
The following raw materials are required for the production of dehydrated anti-rust oil:
1. Petroleum ether: 50%
2. Liquid paraffin: 20%
3. Liquid paraffin oil: 20%
4. Rust inhibitor: 10%
According to the above proportion, the above raw materials can be mixed to produce dehydrated anti-rust oil.
Two, the production method
1. First, the petroleum ether, liquid paraffin and liquid paraffin oil are mixed evenly according to the formula proportion to generate the base oil.
2. Add the anti-rust agent to the base oil and stir well.
3. Put the mixed dehydrated anti-rust oil into a dry anhydrous container to avoid water contamination of the oil.
Third, use precautions
1. Before using dehydrated anti-rust oil, the metal surface should be thoroughly cleaned to avoid residual impurities under the oil film.
2. When using, apply the dehydrated anti-rust oil evenly to avoid local drying.
3. After use, properly store the dehydrated anti-rust oil to avoid direct sunlight and high temperature environment.
Fourth, storage methods
1. Dehydrated anti-rust oil should be stored in a dry and waterless environment.
2. Avoid direct sunlight and high temperature environment when storing.
3. Cover tightly when storing to avoid moisture in the air under the oil film.
In general, this dehydrated anti-rust oil with its excellent performance, wide applicability and convenient operation, become the ideal choice of metal products rust treatment, help to improve the production efficiency and product quality of enterprises.
