Zhengzhou Chorus Lubricant Additive Co.,Ltd.

Home> Blog> What should I do if the high temperature chain oil drips oil on the chain of the spraying line?

What should I do if the high temperature chain oil drips oil on the chain of the spraying line?

May 11, 2022
Ideal viscosity when high temperature chain oil is selected on the spraying line chain; it has a high viscosity index, good adhesion at high temperature, and provides good lubrication.

This is very important, the chain oil in the drying room, the viscosity grade selected is No. 320# or No. 460. The viscosity index cannot be lower than 130. Because the viscosity is too large, the permeability is not good; if the viscosity is too small, it is easy to drip.

Another point is also very important, whether it is an automatic oil dispenser or an oil cup, the oil volume can be adjusted. The oil volume is subject to the complete penetration of the chain without dripping oil. Over-lubrication and under-lubrication are both very harmful. Only when there is a visible or invisible oil film on the chain at any time between the two lubrication intervals, is proper lubrication.

Do the above two points well, add high temperature chain oil to the chain of the spraying line without dripping oil.

chain oil drips


For the high temperature chain oil of the spraying line, it is recommended to use the storage equipment to spray the chain oil of the line.

The chain oil of the spraying line of storage equipment has very high adhesion, does not drip at high temperature, has less volatilization, and will not cause product pollution. It is suitable for the lubrication of the high temperature chain of the spraying line of the storage equipment, and also suitable for other occasions where the paint baking room is required. The maximum operating temperature is 200℃.

Precautions
In the process of storage, transportation and use, impurities and moisture should be prevented from mixing.
Do not mix with other oils.

There is a certain amount of evaporation loss at high temperature, and special attention should be paid to opening the air duct when using it to avoid accidents.

high temperature chain oil drips


Product storage
Any lubricating products should be stored indoors or under shelters; when outdoor storage is unavoidable, horizontal placement should be considered first to avoid the intrusion of rainwater or humid air and prevent the marks on the oil drums from being eroded. Prevent foreign matter contamination during use, storage and transportation.
Products should not be stored at temperatures above 60°C or in severe cold, and should not be exposed to strong light.

At the same time care should be taken that used products contain potentially harmful contaminants and prolonged or repeated apparent contact with used oils of any type and form must be avoided.
Contact Us

Author:

Mr. James

Phone/WhatsApp:

+86 13783582233

Popular Products
You may also like
Related Information
Discussion on the problem of difficult cleaning of drawing oil for cold rolled sheet

Discussion on the problem of difficult cleaning of drawing oil for cold rolled sheet In the process of cold-rolled sheet processing, stamping and drawing is an important link, and the use of drawing...

Problems and solutions of burr, corrosion, difficult cleaning, volatilization insecurity in the use of stainless steel stamping and drawing oil

Problems and solutions of burr, corrosion, difficult cleaning, volatilization insecurity in the use of stainless steel stamping and drawing oil In the process of stamping and drawing of stainless...

What are the hazards of too high oil ash?

What are the hazards of too high oil ash? The harm of excessively high oil ash and the importance of low ash oil In the modern automobile industry, with the increasingly strict environmental...

How to distinguish lubricating oil impurities from sediment? And different handling strategies

How to distinguish lubricating oil impurities from sediment? And different handling strategies In the daily management of lubricating oil, it is important to distinguish and effectively deal with...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Send Inquiry

Tel:0086-371-58651986

Fax:

Mobile Phone:+86 13783582233Contact me with Whatsapp

Email:sales@cn-lubricantadditive.com

Address:No.11 Changchun Road, High-Tech Zone, Zhengzhou, Henan

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send