How to choose metal parts oil cleaning agent?
The long-term use of mechanical parts and equipment will inevitably make the parts stained with oil and stains. The oil on the metal parts is generally an adhesive mixed with grease, dust, rust, etc., which is usually difficult to be diluted and dissolved by water. In order to make the equipment run efficiently and ensure the processing technology of mechanical parts, it is necessary to use professional metal oil cleaning agent, then how to clean it efficiently, safely and economically?
1, according to the cleaning of the metal surface material to make a choice:
The cleaning methods of mechanical parts and large metal equipment are different, and the solvents used are also different. In general, solvent-based metal cleaning agents are used for cleaning parts, and water-based metal cleaning agents are used for cleaning large metal equipment.
2, how to choose water-based metal surface cleaning agent and solvent metal surface cleaning agent:
If the cleaning metal workpiece requires fast volatilization, and has the requirement of rust prevention, you can consider the choice of solvent-based cleaning agent. If you want to save costs, you can consider using a water-based cleaning agent and start cleaning after dilution.
3, the cleaning process:
If ultrasonic or spray cleaning is used, low foam type ultrasonic cleaning agent is generally selected; Special electrolytic cleaning agent is used for electrolytic cleaning; Manual scrubbing or steam cleaning uses solvent-based cleaners.
4, the use of metal surface oil cleaning agent must be rust prevention:
In addition to some equipment and precision parts that need to work for a long time, most of the other equipment is not necessary to prevent rust. Therefore, most enterprises choose water-based metal cleaning agents with low comprehensive cleaning cost and no rust prevention function.
5. Combination of solvent-based metal cleaning agent and production process:
If the anti-rust effect is not ideal, you can consider adding a cleaning tank and adding anti-rust agent in the tank, the metal workpiece in the tank over, you can achieve the ideal anti-rust effect, the consumption of anti-rust agent is very small, will not increase too much cost.
With the rapid development of industrialization, users have higher and higher requirements for metal parts. The processing of many metal parts is becoming more and more mechanized, and the maintenance of products has high requirements. How to clean the dirt on the metal parts is the most concerned problem of the manufacturer, and it is also the oil removal treatment that must be done before the subsequent processing of the metal, so as to avoid the subsequent welding, painting and other processes being affected by the oil.
