With the understanding of cutting fluids, it is known that cutting fluids can be used to cool and lubricate cutting tools and industrial fluids for machining parts. So far, cutting fluids have been widely used in many industries, but in the way of producing cutting fluids, a large amount of Air bubbles, and the production of these air bubbles seriously affects the normal operation of the machine and reduces the efficacy of the product.
Faced with the foam of cutting fluid every day, it is really unhappy. According to third-party survey statistics, the most frequent problem encountered in the use of metalworking fluids is the foam problem, accounting for about 30%. The specific performance is: 1. There is too much foam in the new dispensing solution, and the equipment cannot be turned on, and the alarm is directly issued. 2. After a period of use, the foam builds up a lot and overflows from the device 3. After daily replenishment of new liquid, the foam increases, which may cause various problems such as poor filtration, equipment alarm, and poor cooling.
Why does cutting fluid foam?
1. The cutting fluid flows too fast, and the foam does not overflow in time 2. There are too many right angles in the design of the water tank, or the viewpoint of the nozzle of the cutting fluid is too straight. 3. Contains too much surfactant 4. The cutting fluid is polluted by external substances The hazards of cutting fluid foaming: 1. Foam increases gas-liquid contact, promotes oxidation, and produces flotation 2. Affect the normal operation of the machine 3. Reduce the performance of the product 4. Too much foam leads to no customers buying the product Solutions for cutting fluid foaming: For the above reasons of cutting fluid foaming, it is recommended to use - cutting fluid defoamer to solve the foaming problem, because it is made of special modified polyether and fluorine-containing raw materials through a special process, easily soluble in water, especially suitable for high temperature , strong acid and alkali, high shear force, high pressure conditions. Bubble, anti-bubble. Suitable for metal processing, cutting fluid, microemulsion, high water-containing hydraulic fluid, glycol hydraulic fluid, solvent cleaning, acid-base cleaning agent, coolant, grinding oil, wire cutting fluid, automatic wire cleaning machine, large cleaning machine, lubrication Oil, saponified oil, EDM fluid, drilling fluid, etc. Fine grinding liquid, etching liquid, electrolyte wire cutting liquid and alkali extraction process. It is used in defoaming, defoaming, foaming, dehydration and other occasions.
