Are volatile stamping oils really no-clean?
October 09, 2022
Under what circumstances can volatile stamping oils be no-clean? This question depends on the specific situation to judge, depending on your stamping process, deformation size, and material thickness and so on! Not all volatile stamping oils are no-clean! Can volatile stamping oil be truly no-clean? Now the market demand for no-clean stamping oil is more and more urgent, many customers do not want to clean, and there is one more process for cleaning, and it has to be discharged. In addition, the pressure of environmental protection is too great now , Therefore, many customers want to have no-clean volatile stamping oil. So the question is, how is no-cleaning done? What factors are related to the volatilization rate? Are volatile stamping oils no-clean? Is it suitable for all stamping applications? The following is a simple analysis for you one by one!
The processing and forming process of punching and shearing belt stretching is referred to as punching, and the process of cutting and forming workpieces is called punching and shearing. Both processes can use volatile lubricating oil, and the oil products are generally similar. Some people call it volatile punching oil. It is also called volatile punching and shearing oil, which can be adjusted accordingly according to a specific punching process. Volatile stamping oil generally defines the length of the volatilization time according to the processing thickness, material, size, etc. of the customer. Generally, the volatilization time will be correspondingly longer with the increase of the material thickness. Of course, the specific volatilization time is also related to other aspects, such as Weather conditions will also have a little impact, and it may evaporate more slowly on rainy days.
The faster the volatile stamping oil evaporates, the more no-cleaning effect can be achieved. Similarly, the thinner the material, the lower the processing requirements, the better the no-cleaning effect. However, plates with relatively thick materials must have high lubricity and extreme pressure during processing. After the workpiece is formed, after a certain period of time, there will be some oil remaining on the workpiece. If it must be avoided For cleaning, it is necessary to add imported additives, and the customized stamping oil can achieve the effect, but the price will be more expensive. If you want better results, you have to accept a reasonable price.
Therefore, the problem of no-cleaning of volatile stamping oil depends on your processing technology. You cannot ignore the processing effect because of the blind pursuit of no-cleaning. If the stamping effect cannot be guaranteed, volatilization and no cleaning will have no practical value. Therefore, it is necessary to analyze the specific situation and make a decision based on the overall situation. For some low-demand sheet stamping, it is possible to achieve no-cleaning, while some high-demand stamping processes may only be able to volatilize at a certain speed, leaving surface residues. It will be less. At this time, even if you use volatile stamping oil, its volatilization speed is slower, and no cleaning is impossible!
