Warm reminder of cutting fluid maintenance during holidays
March 02, 2023
During the holidays, if the machine tool is not turned on for a long time, users who use cutting fluid may accelerate the growth of anaerobic bacteria, and the cutting fluid is prone to corruption. Please do a good job of maintenance according to your own situation. The suggestions are as follows:
Cutting fluid maintenance 01. If conditions permit, open the cutting fluid circulation of the machine tool every 2-3 days for 0.5-1 hour 02. Add 0.1-0.3% system maintenance agent to improve antibacterial property and inhibit microbial growth 03. Check whether the machine concentration is within the standard range. If it is low, add it to the correct concentration 04. Add 2-3% of the concentrated solution to the machine system for circulation 05. If the liquid has deteriorated, it is recommended to drain the cleaning machine 06. After the machine is shut down, remove the metal chips in the system and cutting fluid, salvage the floating oil and prevent it from becoming the carrier of bacteria breeding 07. Remove the cutting and oil stains on the workbench, inside the machine tool, and on the three-axis telescopic shield, and do a good job of anti-rust protection To sum up, the production workshop should maintain and inspect the cutting fluid to avoid the deterioration of the metalworking fluid during the holiday, which can not only prolong the service life of the cutting fluid, but also avoid the unnecessary loss caused by it. So hurry up!
