Cutting fluid recovery, waste liquid reduction up to 95%, cost saving
March 30, 2023
It is a common phenomenon in the machining industry in the past that the cutting fluid deteriorates and stinks during machine tool processing or is discharged directly after it becomes a waste liquid due to the loss of components. However, as the country attaches importance to environmental protection, the treatment of waste cutting fluid has become a matter of concern. How to dispose of waste cutting fluid? Everyone should be familiar with traditional cutting fluid treatment methods, but when can they handle them themselves and when is it cost-effective to send them to a third party for treatment? If the amount of cutting waste liquid generated by machining enterprises every month is relatively small, it can be sent to a third-party environmental protection enterprise for treatment. However, if the amount of waste liquid generated is large, it is recommended to directly introduce equipment for self treatment. Intelligent cutting fluid purification machines are well known to a large number of users. The product design of intelligent cutting fluid purification machines is simple and reasonable, with obvious effects. However, under some operating conditions, it is prone to downtime issues, and the price is relatively expensive, making it difficult for many enterprises to choose. The price of similar domestic products is relatively low, but the quality of the product is worrisome. Under this high rotational speed separation form, problems are more likely to occur. Intelligent operation: saving manpower in real time without personnel during work. Filtration, oil removal, sterilization, deodorization, liquid purification configuration, and concentration adjustment in one. Use digital instruments to detect reports, making users more confident. According to statistics, in the daily use of cutting fluid in machining, the main problems reported by machining enterprises are: "The cutting fluid smells, deteriorates, causes workpiece rust, and so on.". Intelligent cutting fluid purification equipment is generated to address these issues. The main reason why cutting fluid tends to stink is due to temperature. The temperature in some places is generally in the 30s, which is very conducive to the growth of cutting fluid. However, excessive cutting fluid will naturally cause odor and deterioration.
To solve the problem of odorization and deterioration of cutting fluid, it is simpler and more convenient to use cutting fluid purification equipment. As long as the equipment adopts large circulation, large flow rate, and large stroke liquid reflux, the heat of the cutting fluid is quickly dissipated, and the temperature of the liquid supply system is low. In addition, internal circulation is also provided during weekends, holidays, and other downtime periods, so that the large flow of cutting fluid can continuously flow, effectively inhibiting the growth of bacteria, At the same time, it is easy to automatically control bacteria for the performance indicators of cutting fluid (such as pH, concentration, foam, etc.) to ensure the quality of cutting fluid and achieve the purpose of sterilization and deodorization.
