How many problems do you encounter in the daily use of high-temperature chain oil?
June 20, 2021
How many problems do you encounter in the daily use of high-temperature chain oil? Today let us analyze the daily use of high-temperature chain oil. 1. Problems a) Smoke and smell at high temperature. b) There is water vapor and water at high temperature, which can not achieve the lubrication effect. c) The chain oil drips down under high temperature, after adding it, it drains and becomes dry. d) Sludge, dirty, and stuck chain under high temperature. e) Rust and corrosion of chain oil at high temperature.
2. Reasons a) Smoke and smell at high temperature. In the current severe smog and serious environmental pollution, smoke and odor are taboos in lubrication. So why does it smoke? The quality of high-temperature chain oil cannot meet the high-temperature lubrication requirements of 200-350°C, and the oil burns and smokes, causing odor. b) There is water vapor and water at high temperature, causing the lubrication effect to be unable. In the case of high-temperature chain lubrication under water vapor conditions, not only the high temperature requirements must be considered, but also the waterproof effect of the chain oil and whether the oil film of the product can resist water vapor. c) The chain oil drips down under high temperature, after adding it, it drains and becomes dry. Many customers have reflected this problem, and the oil that they bought will flow out after adding it, and then it will drip down. This situation is attributed to the fact that the quality of the Base Oil is too low to meet the chain lubrication requirements at high temperatures of 200-350°C, and even the best additives are not applicable. d) Sludge, dirty and stuck in the chain under high temperature In this case, the main reason is that the cleanliness of the high-temperature chain oil is too poor, and the dirt cannot be taken away during the lubrication process; it does not have good oxidation resistance, and it is exposed to air to oxidize during work to form sludge and carbon deposits, which will cause jams for a long time. e) Rust and corrosion of chain oil at high temperature. In the case of continuous lubrication of high-temperature chain oil, this situation generally does not occur. There are probably two reasons for this situation. One is that the chain cannot be lubricated for a long time and oxidizes and rusts; the other is that the chain is in a chemical medium condition. Lubricating oil does not have the performance of anti-chemical media, and is corroded by chemical media.
