What should I do if the anti-rust oil precipitates?
March 30, 2022
Why does precipitation occur during the use of anti-rust oil? What is the reason for this? When using anti-rust oil, how to prevent the occurrence of anti-rust oil precipitation, and how to deal with the precipitation of anti-rust oil?
1. Precipitation phenomenon of anti-rust oil Antirust oil precipitation refers to the phenomenon in which the antirust oil sinks from its solid content to the bottom of the container during storage. When the precipitation of some anti-rust oils is serious, the solid components in the anti-rust oil are precipitated into dense blocks that are not easily redispersed by stirring methods, which is called anti-rust oil agglomeration. 2. Why does the anti-rust oil appear precipitation? In the process of production and processing, the dispersion is poor and the grinding is not fine. In the formulation of oil products, some reasons such as the excessive density of solid raw materials are prone to precipitation. Because too much diluent is added, the viscosity of the anti-rust oil is reduced, and the raw material of the anti-rust oil loses the suspended solids on the surface, resulting in precipitation. The materials undergo a certain chemical reaction or adsorption to each other, causing the gel to precipitate. Rust oil manufacturers randomly produce by purchasing anti-rust oil formulas, and there is a lack of strict quality control in the production of anti-rust oil. 3. How to prevent the precipitation of anti-rust oil? The temperature of the place where the metal anti-rust oil is stored should not be too high or too low; the anti-rust oil should be stored in a cool and ventilated place, and avoid storing it outdoors; the storage time of the anti-rust oil should not be too long, and the metal anti-rust oil products that have exceeded the shelf life should not be used. 4. How to deal with the precipitation of anti-rust oil? For metal antirust oil products that have appeared precipitation, it can be used by hand or mechanical stirring evenly. For agglomeration, you can first pour out the flowed part for use, or scoop up the sediment at the bottom of the container, grind and mix before use. However, in order to avoid unnecessary trouble and product loss. When the metal anti-rust oil has serious precipitation or agglomeration, it should be discarded and the high-quality metal anti-rust oil should be purchased again. Due to the precipitation of anti-rust oil, the function of anti-rust oil will be affected, and it will not have its due anti-rust effect on machines and metal components. Finally, it is recommended that when purchasing anti-rust oil, high-performance and high-quality manufacturers should be selected. .
