How can we solve various problems encountered when using high temperature chain oil?
February 08, 2023
High temperature chain oil is a fully synthetic high performance lubricating oil, which combines high oxidation resistance Base Oil and high temperature stability materials. It can produce excellent multifunctional technology to ensure the best lubrication effect, the best critical stability, the lowest friction, the extremely strong anti-medium stability, and even the anti-wear and anti-wear protection. The chain is a flexible transmission that transmits motion and power according to the meshing and separation with the sprocket teeth. There are various types of chains, but sleeve roller chains are most often used. The key point of chain lubrication is between the chain hub and the chain shaft, which is also the most easily damaged position, which will cause chain tension; The service life of the chain without reasonable lubrication shall not exceed 5 years, and the chain with excellent lubrication can operate for 15 to 20 years.
What problems will you encounter when using high temperature chain oil? How to solve it? When using high temperature chain oil, correct use and maintenance are very important. Improper operation or unreasonable oil selection will more or less cause problems. So, what problems will occur when using high temperature chain oil and how to solve them? Smoke and odor under high temperature Under severe smoke and environmental pollution, smoke and odor are taboos in lubrication. Why does high temperature chain oil smoke? The quality of high temperature chain oil does not meet the lubrication requirements of high temperature 200-350 ℃, and the chain oil burns and smokes, producing peculiar smell. There is water vapor and water at high temperature, which cannot achieve lubrication effect
In the high temperature chain lubrication under water vapor condition, not only the high temperature demand, but also the waterproof effect of the chain oil and whether the oil film of the product can resist water vapor Chain oil drips under high temperature, flows out and becomes dry after adding The chain oil begins to drip after being added at high temperature. The reason for this situation is that the quality of base oil is low, which can not meet the chain lubrication requirements under the high temperature of 200-350 ℃. Even the best additive can not be used. Chain oil is turbid, dirty and stuck at high temperature In this case, the cleanliness of high-temperature chain oil is too poor to take away dirt during lubrication; Without good oxidation resistance, it will be oxidized in contact with air during the working process, forming sludge and carbon deposit, resulting in long-term blockage.
